by CERN

Advanced graphical user interface for particle simulation programs
◀ Previous   △ Index   Next ▶

F4.1} Ribbon

 grab-geometry-ribbon.gif

 Actions Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Label        Shortcut  Description
 -----------  --------  ------------------------------------------
  Select          s     Select/modify bodies, regions or viewports
                        Several combinations with Control and Shift keys

  Pan             x     freely pan/move viewport along the projected plane

  Orbit           t     orbit viewport around the pivot point (see below)

  Info            i     display geometry information on mouse position
                        region, lattice, material, usrbin values, etc...

  Zoom In         z     zoom in. Clicking will zoom x2 or select
                        the region to zoom by drawing a rectangle. To unzoom
                        hold the Control key and click or draw a rectangle

  Zoom Out        Z     zoom out (the opposite of zoom in)

  Zoom On         f     zoom on selected objects (find)

   Menu
  ~~~~~~
  Set Pivot       P     center viewport to clicked location and set it as
                        the pivot point for the orbit command
                        (Equivalent to <Middle-Mouse-Click> without dragging)

  Correct         E     correct overlaps on selected zone on current
                        viewport.

  Paint           p     multiple setting of a value by painting
                        (e.g. MATERIAL, BIASING etc...)

  Center          C     center the other three viewports on the
                        position of the mouse click

  Snap                  enable smart snapping on grid and on body
                        intersections

 Card Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Label        Shortcut  Description
 -----------  --------  ------------------------------------------
  Body          b,space  Add new body
                 B      replicate last body added

  Zone           d      Opens Zone editing tool
                        While zone editing tool is displayed it will
                        toggle between selection of bodies and Operation.
                        See F14.11.2

  Region         R      Add new region

  Transform             Add a transformation card (Fluka: ROT-DEFI)

  Object        space   Add new object

  Delete         Del    Delete selected items

  Clone         Ctrl-d  Clone selected items


 Tools Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Label        Shortcut  Description
 -----------  --------  ------------------------------------------
  Move            g     Tool to move various geometry items       F4.15.1
                        objects, bodies, regions...

  Rotate          r     Tool to rotate geometry items, objects,   F4.15.2
                        bodies, regions around a pivot point
                        and a user defined axis

  Repeat                Create replicas of selected items         F4.15.3

  Volume                Tool to calculate with MC the volume      F4.15.4
                        of regions

  Export       Ctrl-P   Export viewport to image or other formats F4.15.5

  Movie                 Create a movie, by exporting multiple     F4.15.6
                        images along a user defined spline path

  Menu
  ~~~~~
  Link                  Link parameters of bodies and objects.
                        For example make one body having the same position
                        as an object parametrically

  Planner               Dose integration tool for planning radio-protection
                        interventions. It integrates a USRBIN mesh scoring
                        over a time-spline path


 Selection Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Label        Shortcut  Description
 -----------  --------  ------------------------------------------
  Visibility      v     Toggle visibility of objects

  Lock            l     Toggle lock/unlock bodies graphical editing

  Freeze          F     Freeze/Unfreeze selection of bodies

  Wireframe       #     Toggle wireframe on bodies


 View         Shortcut  Description
 -----------  --------  ------------------------------------------
  Run                   Select active run from the drop-down list

  Layer                 Change layer on all viewports
                        The button switches to the default settings for
                        the current orientation system
                        The menu allows to select the same layer for all
                        viewports

  Refresh               Refresh all displays in case of graphic hiccups

  Layout        w,W     Change viewports geometry layout to 2x2, 2x1...

  Synchronize           When enabled viewports flagged as synchronized
                        typically the Red, Blue, Magenta
                        will be panned synchronously so as one
                        to be a cross-section of the other.
                        For best performance use the "Reset" before
                        enabling it

  Menu
  ~~~~
  Reset                 Resets all viewports to their predefined
                        "Home" orientation and position

  Orientation           Set the predefined orientation system and default
                        layers. Currently the following systems are available
                        flair = Y-up:
                           the default flair system with:
                                Z+ = direction of the beam
                                X+ = horizontal (left wrt to the beam)
                                Y+ = vertical (anti-gravity)
                           layout:
                                Red,Blue,Magenta: Media
                                Green: 3D

                        X-up:
                                Z+ = direction of the beam
                                Y+ = horizontal (right wrt to the beam)
                                X+ = vertical (anti-gravity)
                            layout as flair default

                        Z-up:
                                X,Y = horizontal
                                Z+ = vertical (anti-gravity)
                            layout as flair default

                        Dicom-biped:
                                X+ = left of patient
                                Y+ = posterior
                                Z+ = head
                           layout:
                                Red,Blue,Magenta: Lattice/Voxel
                                Green: 3D


 Context Tabs
 ~~~~~~~~~~~~
 Context tabs depending on the current selection

 Body Context Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 grab-geometry-ribbon-body.gif

 Command      Shortcut  Description
 -----------  --------  ------------------------------------------
  Rotdefi               Select and show the associated transformation
                        of the body (ROT-DEFI)

  Transform    Ctrl-T   Geometrical transformation dialog for bodies

  Expand                Expand macro bodies to infinite ones.
                            RPP,BOX in 6 planes
                            RCC     in 2 planes + 1 inf cylinder
                            REC     in 2 planes + 1 inf ell cylinder

  Orthogonal            Correct for orthogonality BOX, WED and REC


 Region Context Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 grab-geometry-ribbon-region.gif

 Command      Shortcut  Description
 -----------  --------  ------------------------------------------
  Material     Ctrl-M   Edit material properties of selected regions

  Rotdefi               Select the associated transformation card from
                        LATTICE card

  Lattice               Goto to the prototype of the selected region
                        LATTICE card

  Expand                Expand parenthesis if any.
                        WARNING use with care can take long or explode
                                the memory

  Cleanup               Remove invalid zones and bodies from selected
                        regions

  Join                  Join selected region cards into a single
                        multi-union card. It deletes the additional
                        cards as well the material assignments

  Transparency          Set the transparency/alpha channel of the region


 Spline Context Group
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 grab-geometry-ribbon-spline.gif

 Command      Shortcut  Description
 -----------  --------  ------------------------------------------
  Add Node              Add nodes in existing spline

  Del Node              Delete nodes from spline

  Sort time             Rearrange time of nodes in ascending order


 Long Actions
 ============
 Command      Shortcut  Description
 -----------  --------  ------------------------------------------
  Stop                  Stop long actions like movie rendering


 Popup Menu
 ~~~~~~~~~~
 Item         Shortcut  Description
 -----------  --------  ------------------------------------------
  Go to Lattice     L   When a lattice region is selected, it
                        moves to the implementation of the prototype

  Zoom On Selected  f   Tries to zoom viewport on selected items


◀ Previous   △ Index   Next ▶